Once the water is used either on the dirt or through the machines it will need to be pumped back to a sump.
A sump is normally a 3x3m drive at 1 in 7 down, this allows a Flygt pump to be installed.
The water is then pumped from the sump to the underground pump station where it goes into a mono tank/pump and pumped to the surface where it is deposited into settling ponds for reuse later.
There is 50 hours of important information that you can learn for yourself in the DIY Introduction to Underground mining package linked below.
It will not only make it much easier to get a start but it will ensure you have all the information and tools you need to make a career out of it.
If you don’t want to become a statistic, then education is key
“Workready” includes the 4 online Underground Training courses, the Australian mining seminar, a full resume review/redo with training and interview prep. Having access to someone with so much experience within the industry to prep you, is a huge advantage in getting your start.
Copyright © 2020 | Underground Training Pty Ltd | Privacy Policy
